Application places
Applicable to electric power, metallurgy, petroleum, petrochemical, fire fighting, mining and various inflammable and explosive places and underwater mobile lighting.
The performance characteristics of
This product is designed in accordance with the requirements of gb3836.1-2000 and 3836.2-2000, with the highest explosion-proof grade of explosion-proof type. It is manufactured in accordance with the national explosion-proof standards and can work safely in various inflammable and explosive places.
High-energy memory-free battery has large capacity, long life and low self-discharge rate. With high-power and high-brightness white LED light source, the irradiation distance of the lamp can reach more than 500 meters, and the visual distance can reach more than 1000 meters.
Imported light touch switch, with working light, strong light, strobe three light design, press the button can be free conversion.
Good tightness, can work normally under 100 meters water; Imported high hardness alloy housing can withstand strong impact and impact.
Smart charger with low voltage protection and charging display device.
Exquisite structure, beautiful light, simple operation, easy to carry.
Humanized power detection, low voltage warning function design, can detect the battery remaining power at any time, the charger USES special charge management chip control, high reliability, fast charging, overcharge protection, short circuit protection, trickle charging, status indication.
Method of use
Before use, insert the plug of the special charger into the charging hole at the end of the headlamp for charging. The indicator light is red when charging and green when fully charged.
When in use, gently press the switch to start the strong light, press the second time to enter the working light, and press the third time to close. If the strong and weak light is pressed and held for 3 seconds, it will enter the frequency flash, and so on.
The operation mode of the power detection function is as follows: turn off the gear and hold the switch for 3 seconds to automatically enter the power detection; 5 times of low-light flashing means 80% power; 4 times of flashing means 60% power; 3 times of flashing means 40% power; 2 times of flashing means below 20% power; 1 time of flashing means below 10% power to be used after charging.
warning
1. The lamp must be charged and removed in a safe place.
2, after each use should be timely charging, in order to be ready for the next use at any time.
Matters needing attention
1. The switch must be turned off when charging. A slight temperature rise of the shell is normal.
2. Do not disassemble structural parts of lamps and lanterns, especially the sealing structural parts.
3. The maintenance of lamps and lanterns must be carried out by professionals in a safe place
4. After use in corrosive environment or seawater, wipe the surface and keep the surface of the shell and transparent parts clean to ensure good luminosity.